Low profile, high performance exhaust ventilators designed for residential, commercial, institutional and industrial applications. Factory assembled for side discharge for installation in ceilings. Constructed of galvanized steel and a molded white polystyrene, easy-to-clean grille.

View All Units

Designed to be used with specific Dayton Bath and Ceiling Ventilators to function as a heat barrier and to protect fire rated ceilings. Intended to stop the spread of heat and flames through the building's ventilation system and to protect both the fan and the ductwork.

For Nonlighted Units
3DPF7 (13 1/2 x 11 1/8 in)
3DPF8 (14 3/8 x 12 1/4 in)
View Units: For Nonlighted Units

For Lighted Units
3DPF9 (13 1/2 x 11 1/8 in)
3DPG1 (14 3/8 x 12 1/4 in)
View Units: For Lighted Units

View All Units

High performance exhaust ventilators designed for residential, commercial, institutional and industrial applications. Factory assembled for horizontal discharge but can be rotated to vertical discharge in the field. Constructed of galvanized steel with a removable access panel on the bottom of unit.

In-Line
View Units: In-Line

In-Line, Doublewide
View Units: In-Line, Doublewide

View All Units

Insulated, quiet, high performance exhaust ventilators designed for residential, commercial, institutional and industrial applications. Factory assembled for horizontal discharge but can be rotated to vertical discharge in the field. Constructed of galvanized steel and a molded white polystyrene, easy-to-clean grille.

View All Units

Designed to be used on specific Dayton Bath and Ceiling Ventilators. Easy to clean decorative polystyrene grille with frosted lens allows 80% of light to penetrate through and is removeable to allow easy replacement of light bulbs.

3AZF9 (Incandescent Lighted)
3AZG1 (Fluorescent Lighted)

View All Units

Dayton fire/smoke dampers are designed for use in HVAC system applications where emergency fire/smoke control is required. Each damper comes standard with a 165ºF electro thermal link and factory installed actuator. Upon temperature elevation in emergency fire smoke situations, dynamic damper closes automatically to prevent the spread of fire and smoke.

Square
View Units: Square

Round
View Units: Round

View All Units

Designed for low leakage HVAC systems or systems requiring modulating airflow. Typically installed inside ductwork of low to medium airflow velocity and static pressure capabilities.

Airfoil - Square
View Units: Airfoil - Square

Round
View Units: Round

Extruded Aluminum - Square
View Units: Extruded Aluminum - Square

View All Units

Dayton Smoke Dampers are designed for use in HVAC system applications where emergency smoke control is required. Upon power interruption, damper closes automatically to prevent the spread of smoke through ducts or ventilation openings in smoke barriers.

Square
View Units: Square

Round
View Units: Round

View All Units

Designed for commercial and industrial applications requiring high volume of air at low to high static pressures.

3FKD7 (20" Standard)
3FKD8 (20" Medium)

View All Units

Designed for cooling workers in factories, warehouses, manufacturing facilities and garages where excessively hot and demanding conditions exist. All circulator heads have high efficiency corrosion resistant propellers with aluminum blades and specially designed motors for continuous operation in extreme temperature environments.

View All Units

Designed for cooling workers in factories, warehouses, manufacturing facilities and garages where humind and demanding conditions exist.

3PEG9 (36" Nonoscillating)
3PEH1 (36" Oscillating)
3PEH2 (36" 3-Phase)

View All Units

Designed to move high volumes of air at low RPM to keep workers comfortable and productive.

3XFY8 (36" Direct Drive)
3XFZ4 (48" Belt Drive)

View All Units

Designed to move high volumes of directed airflow at low velocity, keeping individuals comfortable and productive in factories and warehouses.

Direct-Drive Multi-Position
View Units: Direct-Drive Multi-Position

Direct-Drive Ceiling-Mount
View Units: Direct-Drive Ceiling-Mount

Direct-Drive Suspension-Mount
View Units: Direct-Drive Suspension-Mount

Direct-Drive Mobile
View Units: Direct-Drive Mobile

Direct-Drive Mobile Tiltable Carriage
View Units: Direct-Drive Mobile Tiltable Carriage

Belt-Drive Multi-Position
View Units: Belt-Drive Multi-Position

Belt-Drive Ceiling-Mount
7AP16

Belt-Drive Suspension-Mount
View Units: Belt-Drive Suspension-Mount

Belt-Drive Mobile
View Units: Belt-Drive Mobile

Belt-Drive Mobile Tiltable Carriage
View Units: Belt-Drive Mobile Tiltable Carriage

View All Units

Designed for commercial and industrial applications requiring high volume of air at low to high static pressures.

3FKD4 (20" Standard)
3FKD5 (54" Medium)
3FKD6 (60" Heavy)

View All Units

Mounts circulator to ceiling. Includes quick-turn knobs, allowing easy tilt adjustment and multidirectional airflow.

View All Units

Designed to mount Dayton Yoke Mounted Air Circulator Heads up thru 36 in. on walls, posts or ceilings to provide multidirectional airflow.

3PEH3 (Heavy-Duty)

Provides a portable fixture for air circulator. Includes wheels, station feet, handles and assembly hardware.

View All Units

Mounts circulator to rafter or ceiling I-beam.

4VAE6

Provides a stable portable carriage for air circulator. Can be easily rolled about in industrial environments. Includes quick-turn knobs allowing easy tilt adjustment and multidirectional airflow.

View All Units

Dayton wall collars are for use in commercial and industrial applications and provide an easy way of mounting Dayton propeller fans in the wall opening.

3FKF3 (20")

Galvanized steel housings provide an easy way to install and enclose Dayton exhaust and supply propeller fans in the wall opening.

3FKF4 (12")
3FKF5 (16")
3FKF6 (18")
3FKF7 (20")
3FKF8 (24")
3FKF9 (30")
3FKG1 (36")
3FKG2 (42")
3FKG3 (48")
3FKG4 (54")
3FKG5 (60")

View All Units

Dayton weather hoods are for use in commercial and industrial applications and provide protection of the wall opening from rain or snow.

3FKF2 (20")

Replacement motors.

3RED9 (1/2 hp, 1-Phase)
3REE1 (1 hp, 1-Phase)
3REE2 (1 hp, 3-Phase)
3REE3 (2 hp, 3-Phase)
3REE4 (3 hp, 3-Phase)

View All Units

Designed to meet the general clean air exhaust requirements for industrial and commercial buildings.

View All Units

Designed for use in restaurants, schools, commercial, and industrial applications to exhaust contaminated air from kitchen range hoods, up and away from the roof.

View All Units

Designed to exhaust air in commercial and industrial applications with potential flammable particles or fumes.

View All Units

Designed for commercial kitchen applications or industrial buildings with process exhaust.

3CCR7 (3 hp)
3CCR8 (5 hp)
3CCR9 (5 hp)

View All Units

Designed for applications that require gravity ventilation or can be used in conjunction with powered exhaust, supply or reversible fans.

3FKE1 (20" Hooded Gravity Roof Ventilator)
3FKE2 (54" Hooded Gravity Roof Ventilator)
3FKE3 (60" Hooded Gravity Roof Ventilator)

View All Units

These units are designed to exhaust air in commercial and industrial applications with potential flammable particles or fumes.

View All Units

Dayton rolled formed straight sided roof curbs are designed for use in general exhaust applications. Flat mounting flange fastens directly to the roof deck before insulation is applied for weather tightness. Straight sided surface accommodates roofing material up the side of the curb and over the top for leakproof installation.

View All Units

Roof curb adapters are designed to adapt a standard fan base dimension to an existing roof curb.

3AZK1 (Reducer - 19 to 17)
3AZK2 (Reducer - 22 to 18)
3AZK3 (Reducer - 22 to 20)
3AZK4 (Reducer - 26 to 22)
3AZK5 (Reducer - 30 to 26)
3AZK6 (Reducer - 34 to 30)
3AZK7 (Reducer - 46 to 42)
3AZK8 (Adapter - 19 to 21)
3AZK9 (Adapter - 22 to 26)
3AZL1 (Adapter - 26 to 30)
3AZL2 (Adapter - 30 to 34)
3AZL3 (Adapter - 34 to 40)
3AZL4 (Adapter - 40.5 to 44.5)

View All Units